Engine Expert

Check the Revision History tab to see if you need to download the latest version.

Latest Version

This program will work only if you have already installed Engine Expert from your CD.

After download finishes, run the downloaded file (SetupEE109.exe) to install the new version.

Download Latest Version Engine Expert (0.6 MB)

Ver. 1.09    December 2, 2009
1. Program can now use CPP files measured at the valve.
-----------------------------------------------------------------------------
Ver. 1.08    September 27, 2009
1. Fixed error in converion of FtLbs to Nm.
2. Fixed abbreviation for Nm.
-----------------------------------------------------------------------------
Ver. 1.07    November 3, 2008
1. Added piston speeds to Operation & Development Results.
2. In Air Flow Results show Required Volume Below Critical in cubic
   inches and cc.
-----------------------------------------------------------------------------
Ver. 1.06    March 29, 2008
1. Added suggested value for Exhaust Pipe OD.
2. Fixed problems reading Flow Pro tests that were exported to a Windows
    Flow Pro file.
3. Fixed problems reading Cam Doctor and Doctor Doctor C1 files.
-----------------------------------------------------------------------------
Ver. 1.05    March 13, 2008
1. Changed graph so that it takes advantage of the extra space when the
    program's window is enlarged.
2. Added valve lift curves to the graph.
3. Enlarged the area for display of the cam and air flow source file names.
-----------------------------------------------------------------------------
Ver. 1.04    February 12, 2008
1. Fixed problems with installation on W98 computers.
2. Fixed startup and quit errors that affect computers where the demo had
    been installed but have since had it deleted or removed.
-----------------------------------------------------------------------------
Ver. 1.03    February 7, 2008
1. Fixed bug that did not save keyboard entered air flow data in the engine
    file.
-----------------------------------------------------------------------------
Ver. 1.02    January 25, 2008
1. Fixed bug that prevented printing the reports.
2. Fixed bug at Recip. % Balance Factor entry blank that kept Enter key from
    moving to the next entry. This problem only applies when the "Enter
    moves to the next entry" option is active.
-----------------------------------------------------------------------------
Ver. 1.01    January 21, 2008
1. Initial program release.
-----------------------------------------------------------------------------