2017 PRI Trade Show
Indianapolis, IN
Dec. 7 - 9 
Audie Tech Booth # 5132, 5134

 
Flow Quik PDF Print E-mail

Check the Revision History tab to see if you need to download the latest version.

Latest Version

 

This program will work only if you have already installed Flow Quik from your CD.

After download finishes, run the downloaded file to install the new version.

 

Download Latest Version Flow Quik

 

 

 

 

Revision History

Flow Quick for Windows - Revision History
-----------------------------------------------------------------------------
Ver. 2.08  March 25, 2017
 1. Changed help file to .chm format.
-----------------------------------------------------------------------------
Ver. 2.07  October 11, 2015
 1. New install program implemented.
-----------------------------------------------------------------------------
Ver. 2.05  June 20, 2012
 1. Fixed bug that produced error message when trying to open
    tests done with version 1 software.
-----------------------------------------------------------------------------
Ver. 2.04  May 14, 2012
 1. Fixed bug that stopped display, but not recording of flow when used
    with older Flow Quik hardware.
-----------------------------------------------------------------------------
Ver. 2.03  December 28, 2011
 1. Removed target depression from real-time screen when vacuum motor
    control is not used.
-----------------------------------------------------------------------------
Ver. 2.02  December 18, 2011
 1. Fixed bug that required software key.
-----------------------------------------------------------------------------
Ver. 2.01  October 16, 2011
 1. Released version 2 to support new version of Flow Quik hardware.
-----------------------------------------------------------------------------
Ver. 1.22  March 10, 2008
 1. Fixed bug that affected entry of port cross-sectional areas.  This bug
    only happens in half-metric and metric modes.
-----------------------------------------------------------------------------
Ver. 1.21  October 3, 2007
 1. Added provision for changing column widths in the legend at the top of
    reports.  The entries for this are in Report Setup.
-----------------------------------------------------------------------------
Ver. 1.20  September 26, 2007
 1. Fix bug that affects lifts for tests done while in Metric modes.
-----------------------------------------------------------------------------
Ver. 1.19  May 21, 2007
 1. Expand COM port selections to COM 9.
-----------------------------------------------------------------------------
Ver. 1.18  March 15, 2007
 1. Fixed a bug that could remove a test from the list if it was edited via
    Flow Quik hardware and the changes were not saved.  This only happened
    when a new test had been done earlier.
-----------------------------------------------------------------------------
Ver. 1.17  March 6, 2007
 1. Fixed bug that could zero out flow data when an existing test is edited.
-----------------------------------------------------------------------------
Ver. 1.16  January 23, 2007
 1. Added ability to save the graph to a .bmp file.
-----------------------------------------------------------------------------
Ver. 1.15  November 7, 2006
 1. Fixed problem in keyboard test entry screen.
 2. Fixed problem that caused install problems on a few computers.  This fix
    affects only the full program, not the downloadable update.
-----------------------------------------------------------------------------
Ver. 1.14  March 14, 2006
 1. Fixed MS bug that displayed data in the lists at the wrong location, but
    only on a only few XP machines.  Very strange!
-----------------------------------------------------------------------------
Ver. 1.13      January 23, 2006
 1. Fix bug in reading & writing of project files.
 2. Fixed printing bug that affected Windows versions other than XP.  Thank
    you Microsoft for such wonderful inconsistency!
 3. Added private calibration.
-----------------------------------------------------------------------------
Ver. 1.12      November 10, 2005
 1. Added real-time screen printout.
-----------------------------------------------------------------------------
Ver. 1.11      March 12, 2005
 1. Fixed bug that affected reading of the swirl meter.
-----------------------------------------------------------------------------
Ver. 1.10      February 1, 2005
 1. Added "3 Inch with High Actual Depression" to list of Flow Quik models.
    This setting should be used if you have a 3 inch Flow Quik with a bug in
    the EPROM that causes it to report actual depression numbers that are 63%
    too high.

    This bug was dates from February 21, 2002.  The bug affects only 3 inch
    Flow Quiks. It does not affect 2/3 inch combo Flow Quiks.  Current plans
    are to continue using the "bug version" of the EPROM since most 3 inch
    Flow Quiks have this version.
-----------------------------------------------------------------------------
Ver. 1.09      July 29, 2004
 1. Changed toolbar icon on real-time screen for "Edit Test Details" so that
    it will not be confused with the Setup icon.
-----------------------------------------------------------------------------
Ver. 1.08      May 2, 2004
 1. Fixed bug that could cause a crash on "Error Number 9 ..." in rare
    situations.
-----------------------------------------------------------------------------
Ver. 1.07      September 27, 2003
 1. Depression display to nearest 0.05 inch now works correctly.
 2. Changed hotkey for accessing Hardware Setup from realtie screen to Ctrl H
    so that it is consistent with the main screen.
 3. Fixed bugs in support for depression controller.  Depression controller
    and Flow Quik can share a COM port.
-----------------------------------------------------------------------------
Ver. 1.06      November 5, 2002
 1. The bug fix in version 1.05 did not work for all tests.  This one should.
-----------------------------------------------------------------------------
Ver. 1.05      November 3, 2002
 1. Fixed bug that deleted flow numbers from tests when editing a test that
    was converted from the DOS version.  Tests must be converted from DOS
    again after installing this new Windows version.
-----------------------------------------------------------------------------
Ver. 1.04      September 19, 2002
 1. Fixed bug that gave error message when importing FP ver. 2 files with
    "Load after Converting" checked.
 2. Program is officially released (Beta is done).
-----------------------------------------------------------------------------
Ver. 1.03 Beta     August 15, 2002
 1. Fixed cosmetic problem on real-time screen that chopped off the "-" in the
    large swirl numerals.
-----------------------------------------------------------------------------
Ver. 1.02 Beta     August 15, 2002
 1. Flow Adjustment now works.
-----------------------------------------------------------------------------
Ver. 1.01 Beta     August 12, 2002
 1. First Beta version.
-----------------------------------------------------------------------------

 
Audie Technology, Inc. All Rights Reserved - Questions Comments: Email Audie Technology
Site Map - Web design & maintenance by Gaddy Web Design